top of page


The Drift Pram was designed to be a small, light minimalist two person drift boat.  The square ended design allows for more width out to its ends to increase carrying capacity and improves the draft height on the river.  This boat will float through all but the skinniest water at full load.  This boat is amongst the easiest to build and is a very efficient use of material.  


This boat can be slid into the bed of a full sized pickup truck and dragged through the woods to access rivers and streams with unimproved launches.

About Our Plans:

Plans consist of a set of lines- dimensions, angles and drawings that provide all of the necessary information to fabricate and assemble the hull.  A Bill of Materials and assembly notes are also included with your purchase.  Upon payment confirmation, you will be emailed the PDF set of plans. Check your SPAM folder for an email from


Overall Length:  11'5-1/2"

Width at the oarlocks: 5'1"

Bottom width: 3' 9-3/4"

Side height: 1'7"

Wood Drift Pram
Wood Drift Boat
Drift Pram
bottom of page